Nikon fe2 Manual de usuario descargar pdf (Pagina 44)

CONTROLS

DETAIL —continued

Infrared Focusing Index

When you shoot infrared film, note that the plane of sharpest

focus is slightly farther away than that in visible-light photo

graphy. As a rule of thumb, you can compensate for this shift

in focus by referring to the infrared compensation index (in the

form of either a dot or a line) near the focusing index on the lens

barrel. (Some lenses, including the Reflex-Nikkor, do not need

compensation.)

After focusing the image sharply through the viewfinder, check the

focused distance and reset the focusing ring so that the red infrared

compensation index lines up with the prefocused distance. Be sure

to shoot with the appropriate filter, such as the R60, etc. (In this

photo, subject-to-camera distance is set at«.)

Film Plane Indicator #

The film plane indicator (-®- ) is engraved on the top deck Just

behind the shutter speed dial. It indicates the exact position of

the film plane inside the camera and is used to measure the

exact distance between the subject and film plane, such as in

macrophotography. The distance between the film plane and

lens mounting flange @ is exactly 46.5mm.

Distributed by WWW.LENSINC.NET

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 65 66

Sin comentarios

Nikon fe2 Manual de usuario Pagina 44