Nikon AF-S VR 500mm f-4G ED - AF-S VR 600mm f-4G ED Manual de usuario descargar pdf (Pagina 30)

Notes on using vibration reduction

• Wait until the image in the viewfinder stops vibrating before fully depressing

the shutter release button after you have lightly pressed the shutter release

button.

• Due to the characteristics of the vibration reduction mechanism, the image in

the viewfinder may become blurred after releasing the shutter.

• If you set the AF start (AF-ON) button (Fig. 4) to “ON“ on the camera or the

Focus operation button on the lens, vibration reduction will not operate.

• Set the vibration reduction mode switch to “TRIPOD“ to reduce camera shake

and image shake in the viewfinder while using a tripod. Very slight camera

shake may fail to activate the vibration reduction system. Conversely, the VR

system may cause camera shake in the lens. In this case, vibration reduction

should be turned off. When using a tripod with an untightened head or a

monopod, select NORMAL mode.

• When taking panning shots, be sure to set the vibration reduction mode

switch (Fig. 8) to “NORMAL“.

• If you move the camera in a wide arc when panning, vibration in the direction

of that movement is not affected. For example, if you pan the camera

horizontally, only vibration in the vertical direction is reduced, making smooth

pans much easier.

• Do not turn the camera power OFF or remove the lens from the camera while

the vibration reduction mode is in operation. (Otherwise, the lens may emit a

chattering noise if the camera is shaken. This is not a malfunction. Turn the

camera power ON again to correct this.)

• With F80-Series/N80-Series, F75-Series/N75-Series, F65-Series/N65-Series,

D300, D200, D100, D80, D70-Series, D50 and D40-Series cameras, vibration

reduction does not work while the built-in flash is recycling.

8. Depth of field

• Approximate depth of field can be determined by

checking the depth-of-field scale. (Fig. 9)

• If your camera has a depth of field preview (stop-

down) button or lever, depth of field can be

observed while looking through the camera

viewfinder.

• For more information, see p. 216.

9. Setting the aperture

• Because this lens does not have an aperture ring, you must set the aperture on

the camera.

Depth-of-field

scale

Distance index

line

Fig. 9

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 223 224

Comentarios a estos manuales

Sin comentarios

Nikon AF-S VR 500mm f-4G ED - AF-S VR 600mm f-4G ED Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Lentes Nikon AF-S VR 500mm f-4G ED - AF-S VR 600mm f-4G ED