Nikon MV-1 Manual de usuario descargar pdf (Pagina 8)

Basic operation

1. Connecting to camera and inserting memory card

START

ctF

sh C

ard

(Illustrations show the F6)

Confirm film is not loaded in the camera (E is

displayed in the frame counter) and battery

power is sufficient.

• If shooting data stored in the camera is too large

and/or data remains in the memory card, data

transfer from the camera to the memory card will

take a long time. Change batteries for new ones

when necessary.

xSee camera’s instruction manual for battery

power confirmation.

Turn the camera power off.

Remove the cap on the 10-pin terminal, insert

the MV-1 plug so that the

mark on the plug

aligns with the index mark • on the camera

terminal, then rotate in the direction shown to

lock it in place.

• The position of the 10-pin terminal may vary

depending on your camera model. Refer to your

camera’s instruction manual for details.

• The Extension Cord MC-21 cannot be used.

Insert the memory card into the memory card

slot.

• Supplied memory card has been formatted in FAT

file system (x 13) and can be used as it is.

• Hold the memory card so that the label is on the

same side as the MV-1 start button, and insert it

pins-first into the memory card slot.

• Use a memory card in which no data remains.

• Refer to the list of supported memory card types

on p. 24 for more information.

MV-1 (EGFSI) 05.2.14 5:21 PM Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 123 124

Sin comentarios

Nikon MV-1 Manual de usuario Pagina 8